Industrial Monel Blind Rivet Oval

Industrial: Rivets for industrial usage include break-mandrel blind “pop” rivets, structural blind rivets such as, monobolts, Q-rivets, repetition rivets, semi-tubular rivets, and threaded inserts. Rapid Rivet is Your Rivet Specialist. Rapid Rivet is Your Rivet Specialist. We are a Master Stocking Distributor of rivets, rivet nuts, threaded inserts, and tooling. We have a large and varied inventory to meet your needs. No automated telephone answering system here at Rapid Rivet. Speak directly to a knowledgeable salesperson who will assist you in selecting the rivet you require. We pride ourselves in our ability to give you a fast and competitive quotation. Many items are in stock, and next day delivery is available when requested. Most items are available with manufacturer’s certifications and test reports. We also can offer bar coding, unit packaging, and will set parts and shipments up for long-term release dates.

Monel:  Monel is a Nickel-Copper alloy. (67% nickel 30% copper, plus trace elements)  It has good corrosion resistance, and high-strength properties.  Applications for Monel include marine engineering, boilers, tanks, valves, and pumps.  It is para-magnetic; meaning it is attracted to a magnet, but will not adhere.  It is normally not plated, but can be cadmium & chromate plated per QQ-P-416 under certain specifications.  It is not heat-treated.  It is a very expensive material, due to the nickel content.  Head mark on MS20615 and NAS1200M series only, is an indented double dimple.

Blind:  (As in break-mandrel Blind Rivets, or “pop” rivets)  A blind rivet is a two-piece fastener consisting of a rivet body (sometimes called a “sleeve”) and the setting device called a mandrel. (or, stem or nail)  A blind rivet is used where access to a joint is limited to one side.  (You cannot “see” the other side of the joint, therefore it is “blind”)  A blind rivet is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side.  As the head of the mandrel reaches the face of the blind side of the material, and at a pre-determined force, the mandrel will snap at the break point of the mandrel.  The rivet body forms a tight joint, the head of the mandrel remains encapsulated in the blind side, and the mandrel stem is ejected.

Blind Rivet:  Blind rivets can be set by relatively inexpensive tooling, which reduces costs. Structural blind rivets are also available for the aircraft industry and commercial uses. Structural blind rivets are employed where a solid rivet would normally by used, but where access to a joint is limited to one side.

Oval:  Oval Head.  Term used in semi-tubular rivets, referring to a protruding head with an oval cross-section that is about twice the diameter of the body of the rivet.