Aerospace Steel Brazier Drive Rivet

Aerospace: Rivets for aerospace applications include aluminum solid and blind rivets, as well as titanium, stainless steel, monel, inconel, and other exotic materials. Oversize repair rivets are available in solid and blind rivet forms as well. Rapid Rivet is Your Rivet Specialist. We are a Master Stocking Distributor of rivets, rivet nuts, threaded inserts, and tooling. We have a large and varied inventory to meet your needs. No automated telephone answering system here at Rapid Rivet. Speak directly to a knowledgeable salesperson who will assist you in selecting the rivet you require. We pride ourselves in our ability to give you a fast and competitive quotation. Many items are in stock, and next day delivery is available when requested. Most items are available with manufacturer’s certifications and test reports. We also can offer bar coding, unit packaging, and will set parts and shipments up for long-term release dates.

Steel:  (Also called Mild Steel and Low Carbon Steel)  This is the most common material for use in fasteners.  Steel is an alloy consisting of mostly iron, and a small percentage of carbon, (between 0.05 – 1.1%) It is the least expensive metal.  It is strong, has good workability, and can be produced in a wide variety of forms.  Its chief disadvantage is its susceptibility to corrosion (rust) in an un-plated, unprotected form.  Its other drawback, in aerospace applications, is that steel is about three times heavier than aluminum, while not offering any great advantage in strength.  Steel is magnetic.  Most mild steel used for rivets is heat treated, although there are some exceptions.  Most steel rivets will have some form of protective finish or coating when delivered from the mill (factory) to prevent corrosion.  Most steel for commercial applications will be plated zinc with a clear chromate.  Most steel for military or aerospace applications will be plated cadmium with a yellow chromate.  

Drive: A drive rivet is a form of blind rivet. The body of the drive rivet is hollowed-out out and a pin sits in the hollowed-out portion. This pin protrudes past the head of the rivet, and is designed so it can be driven into the body of the rivet, with an ordinary hammer. The end of the shank is divided into quarters, or thirds, to allow it to be deformed. As the pin is hammered into place, it forces the ends of the rivet to splay outwards, pulling and clinching the material into place.

Drive Rivet:  A drive rivet is a form of blind rivet. The main virtue of this rivet is that it can be installed without special tooling. It can also be used in blind-hole applications, in wood or low-density materials.

Brazier:  Brazier Head.  This head style has a profile with an oval cross-section, and has a large diameter compared to the body.  The head diameter of a brazier head rivet will be 250% the size of the body diameter, compared to 200% the size of the body diameter for the universal head rivet.  AN455 series.