Military Monel A-O Series Threaded Inserts

Military: Military contractors and sub-contractors use a wide variety of rivets to fabricate items, assemblies, and sub-assemblies intended for our armed forces. Rapid Rivet is Your Rivet Specialist. We are a Master Stocking Distributor of rivets, rivet nuts, threaded inserts, and tooling. We have a large and varied inventory to meet your needs. No automated telephone answering system here at Rapid Rivet. Speak directly to a knowledgeable salesperson who will assist you in selecting the rivet you require. We pride ourselves in our ability to give you a fast and competitive quotation. Many items are in stock, and next day delivery is available when requested. Most items are available with manufacturer’s certifications and test reports. We also can offer bar coding, unit packaging, and will set parts and shipments up for long-term release dates.

Monel:  Monel is a Nickel-Copper alloy. (67% nickel 30% copper, plus trace elements)  It has good corrosion resistance, and high-strength properties.  Applications for Monel include marine engineering, boilers, tanks, valves, and pumps.  It is para-magnetic; meaning it is attracted to a magnet, but will not adhere.  It is normally not plated, but can be cadmium & chromate plated per QQ-P-416 under certain specifications.  It is not heat-treated.  It is a very expensive material, due to the nickel content.  Head mark on MS20615 and NAS1200M series only, is an indented double dimple.

A-O Series:  A threaded insert with a reduced-profile, nearly flush head, similar to the A-K series, but with a reduced body diameter, made by AVK Industrial Products.

Threaded:   As in having a screw thread.  A screw thread is a ridge of uniform section in the form of a helix on the internal or external surface of a cylinder.  Internal threads are those in nuts, external threads are those found on bolts, screws, and studs.  Threaded components are the primary means of assembly for interchangeable or removable connections.  They are in a sense, the opposite of rivets, which are intended for permanent connections.  Screw threads give fasteners their ability to support and transfer loads.  Threaded components include Rivet Nuts, and Threaded Inserts.  These items are internally threaded components, like a nut, that can be permanently attached to another structure, to allow an external threaded component, such as a screw or bolt, to be installed.  

Threaded Inserts:  A threaded insert is a form of hardware that allows an internal or external threaded form to be installed in or through a body of work that in turn, can receive a bolt or nut, allowing two bodies to be joined together.  It is, in essence, a tubular rivet with internal threads.  It is also a blind rivet, in so much as access to the reverse side of the joint is not required to install the insert.  There are many different types of threaded inserts for use a wide variety of materials and applications.  Some types of threaded inserts install by use a special tool with a threaded stud that engages the threads of the insert and pulls upward.  This causes a portion of the body of the insert to deform, and expand against the reverse side of the material being fastened, forming a secure, permanent joint, that a screw or bolt can be attached to.  There are inserts with a stud, or external thread, in place of internal threads, that allow a nut to be installed.  Some types of threaded inserts swage into place.  In this type of threaded insert, a nut is held captive within a thin metal sleeve.  An installation tool engages the threaded portion of the nut, and draws the nut upward into the thin metal sleeve portion.  The nut portion is slightly wider than the sleeve, and as the nut is drawn into the sleeve, the sleeve is expanded outward against the reverse side of the work piece.  The nut portion jams into the sleeve, and is fixed into place.